Guides

Floor area measurement standards around the world

There is no single way to measure a home. Each market has a standard or a strong convention that decides where you measure to, which spaces count and how the figure is reported. Knowing which one applies explains why the same apartment can be listed at different sizes, and helps you label your own plans correctly.

· 4 min read

United States: ANSI Z765

ANSI Z765, published by Home Innovation Research Labs, is the American standard for calculating the square footage of single-family homes. Its current edition is ANSI Z765-2021.

Fannie Mae has required appraisers to measure and report gross living area under ANSI Z765-2021 for loans it buys since April 1, 2022. Under that approach, detached and attached houses are measured using exterior dimensions, condominiums in multi-unit buildings by interior dimensions, and only finished, above-grade space counts as gross living area. Below-grade finished space, garages and unfinished areas are reported separately.

The standard also sets rules for finished space, such as minimum ceiling heights; consult the published standard for the exact figures before relying on them.

United Kingdom and international: RICS and IPMS

The RICS Code of Measuring Practice defines gross external area, gross internal area and net internal area, and for many years has been the reference for UK property measurement. RICS Property Measurement, second edition, added the International Property Measurement Standards for residential buildings: IPMS 1, IPMS 2 – Residential and IPMS 3, which has three variants for apartments, houses and duplexes.

In practice, UK residential agents often quote gross internal area, while IPMS aims to make measurements comparable across countries.

Sweden: SS 21054

In Sweden, area and volume of buildings are defined by the national standard SS 21054, whose current edition, SS 21054:2020, replaced the 2009 edition. The revision clarified, among other things, how balconies are measured and added new definitions.

Swedish practice separates living area (boarea, BOA) from secondary area (biarea, BIA), such as storage rooms and unheated spaces, and uses gross area (BTA) and usable area (BRA) for whole buildings. Listings usually quote BOA, sometimes with BIA in brackets. The standard is sold by the Swedish standards body SIS, which also publishes an introduction to it.

Dubai and the wider Gulf

In Dubai, sale and purchase agreements are expected to state the net usable area of a unit, and the area registered on the title deed is generally treated as the authoritative figure. Marketing material may quote built-up area that includes balconies, so property portals advise buyers to check which figure they are looking at.

Because terms such as carpet area, net area and saleable area are not used consistently in listings, compare the sale agreement with the title deed rather than relying on a brochure.

What this means for your floor plans

State the measurement basis on every plan, for example “gross internal area per RICS” or “living area (BOA)”. Keep balconies, terraces and garages as separate lines. If you sell in more than one market, keep the geometry and change only the reporting. Floorshape is built for that: it stores the walls once, calculates net room areas and gross floor area from them, and switches between square meters and square feet without redrawing.

One home, several honest numbers

Imagine a single-storey house with a balcony and a garage. Measured to the outside of the external walls, it has one figure. Measured to the inside face of the external walls, it has a smaller one. Add up only the rooms and the result is smaller again. Leave out the garage, as US gross living area does, and it drops further; include the balcony, as some marketing figures do, and it rises.

None of these is wrong. Problems start when a figure travels without its basis: from a valuation into a listing, or from a developer brochure into a sale agreement. The fix is simple and costs nothing: write the standard or basis next to every area you publish.

When standards conflict

If a lender, regulator or contract names a standard, use that one. If none is named, use the convention buyers in your market expect, and say so. For cross-border portfolios, consider IPMS, which was designed to make measurements comparable between countries, and report local measures alongside it.

Standards are revised from time to time, as SS 21054 was in 2020 and ANSI Z765 in 2021, so check the current edition before relying on a definition and note the edition you used next to the figure.

Frequently asked questions

What is ANSI Z765?

ANSI Z765 is the American standard for calculating square footage of single-family homes; its current edition is ANSI Z765-2021, required by Fannie Mae for appraisals since April 1, 2022.

What is IPMS?

IPMS, the International Property Measurement Standards, is a set of measurement standards adopted by RICS; IPMS: Residential Buildings defines IPMS 1, IPMS 2 – Residential and IPMS 3.

What is SS 21054?

SS 21054 is the Swedish standard for area and volume of buildings; SS 21054:2020 replaced the 2009 edition and defines terms such as living area (BOA) and secondary area (BIA).

Why do two measurements of the same home differ?

Usually because they follow different rules: where to measure to, whether walls, balconies or basements count, and how the result is rounded.

Sources

  1. Home Innovation Research Labs — ANSI Z765 square footage method
  2. Appraisal Institute — Fannie Mae adopts ANSI standard for square footage measurements
  3. NAR — Why do square footage disputes arise?
  4. RICS — Code of Measuring Practice, 6th edition (2015)
  5. RICS — Property Measurement, 2nd edition (2018), incl. IPMS: Residential Buildings
  6. isurv — IPMS: introducing Residential Buildings
  7. SIS — Introduction to SS 21054:2020 (area and volume of buildings)
  8. SIS — SS 21054:2009 (withdrawn, replaced by SS 21054:2020)
  9. SIS press release — revised area measurement standard (balconies, new definitions)
  10. Property Finder — Carpet area vs built-up area (UAE)
  11. BSA Law — What Dubai law says about area shortfalls
Early access · invites rolling out

Shape your next plan by asking.

Join early access. It's free while we build with our first users.

Invites go out in waves. Tell us who you are and we'll prioritise the workflows we can help with first.

Free during early access. No credit card.