Tools

Floor area calculator

Add each room's length and width and get its area and the total, in square meters or square feet. The calculator runs entirely in your browser, nothing is uploaded, and you can copy the result as a simple table for an email or a spreadsheet.

Units
–
–
–

Total area 0.00 m²

How it works

  1. Choose units

    Pick metric (m, m²) or imperial (ft, ft²).

  2. Add rooms

    Enter a name, length and width for each room or part of a room.

  3. Read and copy the total

    See each room's area and the total, then copy the table.

How the calculation works

Each room's area is its length multiplied by its width. The total is the sum of the rooms. In metric mode you enter meters and get square meters; in imperial mode you enter feet and get square feet. Results are rounded to two decimals for display, but the total is calculated from the unrounded room areas, so rounding never accumulates.

The conversion between systems uses the exact definition of the international foot, 0.3048 m, so 1 m² is 10.7639 ft² and 1 ft² is 0.09290304 m².

Rooms that are not rectangles

Split an L-shaped or irregular room into rectangles and add each one as its own row, for example “Living A” and “Living B”. For a corner cut off by an angled wall, add the full rectangle and then subtract the triangle, whose area is half its base times its height. Our guide to calculating floor area walks through worked examples.

What the total means

Adding up rooms measured inside the walls gives net floor area. It will be smaller than the gross area of the home, because gross area includes the walls. If you need a figure for a sale or an appraisal, check which measurement standard your market uses and label the result accordingly.

Frequently asked questions

How do I calculate the floor area of my house?

Measure each room's length and width, multiply them to get each room's area and add the rooms together. The calculator above does the arithmetic and the unit conversion for you.

Does this calculator include wall thickness?

No. It adds the room areas you enter, which gives net floor area. Gross floor area also includes the walls.

Can I use feet and inches?

Enter decimal feet: 12 ft 6 in is 12.5 ft. Divide the inches by 12 and add them to the feet.

Is my data stored?

No. The calculator runs entirely in your browser and nothing you enter is sent to Floorshape.

Early access · invites rolling out

Shape your next plan by asking.

Join early access. It's free while we build with our first users.

Invites go out in waves. Tell us who you are and we'll prioritise the workflows we can help with first.

Free during early access. No credit card.