Guides

How to calculate floor area

Floor area is length times width for a rectangular room, and the sum of simple shapes for everything else. The hard part is not the arithmetic but measuring consistently, splitting odd rooms correctly and knowing which spaces to include. This guide covers all three, with worked examples in metric and imperial units.

· 4 min read

The basic rule: length × width

For a rectangular room, measure the length and the width from wall face to wall face at floor level, then multiply. A bedroom that measures 3.6 m by 4.2 m has an area of 3.6 × 4.2 = 15.12 m². In feet, a room of 12 ft by 14 ft has 12 × 14 = 168 ft².

Always measure in one unit and convert at the end. Mixing centimetres and metres, or feet and inches, is the most common source of errors. If you measure in feet and inches, convert inches to decimal feet first: 12 ft 6 in is 12.5 ft.

L-shaped and irregular rooms

Split any room that is not a rectangle into rectangles and triangles, calculate each piece and add them up. Make sure the pieces do not overlap and do not leave gaps.

Worked example: an L-shaped living room is 6.0 m along one wall. Split it into a 6.0 × 4.0 m rectangle and a 2.5 × 3.0 m rectangle that forms the short leg of the L. The total is 24.0 + 7.5 = 31.5 m².

For an angled wall, treat the corner it cuts off as a triangle with area ½ × base × height. A 4.0 × 3.0 m room with a corner cut off by a diagonal wall running 1.0 m along each side loses ½ × 1.0 × 1.0 = 0.5 m², leaving 11.5 m².

Curved walls, such as a bay window, can be approximated by a semicircle (½ × π × r²) or by several small rectangles. For most residential purposes an approximation to the nearest 0.1 m² is enough.

Converting between square meters and square feet

Since 1959 the international foot has been defined as exactly 0.3048 m. One square foot is therefore 0.3048 × 0.3048 = 0.09290304 m², and one square meter is about 10.7639 ft².

So the 31.5 m² living room above is 31.5 × 10.7639 ≈ 339.1 ft². Convert the final total rather than each measurement, and round only once, at the end.

What to include and what to leave out

Which spaces count depends on why you are measuring. For a flooring order you measure exactly the surface to be covered, including inside closets. For a sale, the total is usually defined by a measurement standard: in the US, many appraisals follow ANSI Z765, which counts finished above-grade area and reports garages and basements separately; in the UK, RICS defines gross internal area and related measures.

Whatever the purpose, write down the basis you used, such as “net area measured inside walls, excluding balconies”. Two honest measurements of the same home can differ by several percent simply because they followed different rules.

  • Measure at floor level, wall face to wall face.
  • Do not subtract small columns or radiators unless your standard requires it.
  • Measure balconies, terraces and garages separately.
  • For flooring, add a waste allowance; tile layouts commonly need more than plank flooring.

Checking your result

Add up the rooms and compare the total with the building's outside dimensions. The rooms should come to less than the gross area, because walls take up space; in the worked example in our net vs gross floor area guide, walls take about 15 percent of the gross external area. A total that is larger than the footprint means a room was counted twice or measured to the wrong reference.

Measuring tips that prevent errors

A laser distance measurer is faster and more accurate than a tape for room-sized distances, especially when working alone. Take each measurement twice. If the two readings differ by more than a centimetre, take a third. Measure just above the skirting boards rather than over them, and note any recesses such as chimney breasts or built-in wardrobes separately so you can decide later whether to include them.

How it works

  1. Sketch the room

    Draw the outline and mark every wall length you will measure.

  2. Measure wall to wall

    Measure at floor level in one unit; write each length on the sketch.

  3. Split into simple shapes

    Divide L-shapes and angled rooms into rectangles and triangles.

  4. Calculate and add

    Multiply length by width for each rectangle, use ½ × base × height for triangles, and add them up.

  5. Convert and record

    Convert the total once, round once, and note the measurement basis.

Frequently asked questions

How do you calculate the floor area of a room?

Multiply the room's length by its width, measured wall to wall at floor level. For non-rectangular rooms, split the room into rectangles and triangles and add their areas.

How do I calculate the area of an L-shaped room?

Split the L into two rectangles that do not overlap, calculate each one and add them. For example, 6.0 × 4.0 m plus 2.5 × 3.0 m equals 31.5 m².

How many square feet are in a square meter?

One square meter is about 10.7639 square feet, because one foot is exactly 0.3048 meters.

Do you include closets in floor area?

For flooring, yes. For a sale or appraisal, follow the measurement standard used in your market and state which one you used.

Sources

  1. NIST — U.S. survey foot and the international foot (1 ft = 0.3048 m exactly)
  2. NOAA — The international foot
  3. Home Innovation Research Labs — ANSI Z765 square footage method
  4. RICS — Code of Measuring Practice, 6th edition (2015)
Early access · invites rolling out

Shape your next plan by asking.

Join early access. It's free while we build with our first users.

Invites go out in waves. Tell us who you are and we'll prioritise the workflows we can help with first.

Free during early access. No credit card.