Guides

Floor plan scale, explained

A floor plan's scale is the ratio between a distance on the drawing and the same distance in the real building. At 1:100, one centimetre on paper is one metre in reality. Understanding scale lets you measure from a printed plan, choose the right scale for your own drawings and avoid the classic mistake of trusting a plan that was printed at the wrong size.

· 4 min read

How scale ratios work

A scale such as 1:100 means one unit on the drawing equals 100 of the same unit in the building. So 1 mm on paper is 100 mm, or 10 cm, in reality, and 1 cm is 1 m. At 1:50, the drawing is twice as large: 1 cm on paper equals 50 cm in the building.

Worked example: on a plan printed at 1:100, a room measures 35 mm by 42 mm with a ruler. Multiply by 100 to get 3,500 mm by 4,200 mm, so the room is 3.5 m by 4.2 m and its area is 14.7 m².

Common scales for floor plans

In metric countries, 1:50 is common for houses and apartments where detail matters, and 1:100 for larger buildings and overviews. Details such as kitchen layouts are drawn at 1:20 or larger.

In the US, architectural scales are written as a fraction of an inch per foot. The most common residential floor plan scale is 1/4 inch = 1 foot, which is a ratio of 1:48. For larger buildings, 1/8 inch = 1 foot, a ratio of 1:96, is common. Because 1:48 and 1:50 are close, people sometimes treat them as equal; for accurate measurement, they are not.

  • 1:20 — details such as kitchens and bathrooms.
  • 1:50 — house and apartment plans.
  • 1:100 — larger buildings, overviews.
  • 1/4 in = 1 ft (1:48) — typical US residential plan.
  • 1/8 in = 1 ft (1:96) — larger US plans.

Why printing changes the scale

A scale ratio is only true at the paper size the plan was drawn for. Print a 1:100 plan drawn for A3 on A4 paper and everything shrinks by a factor of about 0.71, because A4 is half the area of A3. The plan is now roughly 1:141, and measuring it as 1:100 underestimates every length by about 29 percent.

The same happens with PDFs viewed on screen and images in listings. That is why a scale bar, a drawn line labelled with its real length, is more reliable than a ratio: it shrinks and grows with the drawing. If a plan has a scale bar or a known dimension, measure that first and work out the true scale from it.

Scale in digital floor plans

In CAD and in Floorshape, plans are drawn at full size, 1:1, in real units. Scale only matters when printing or exporting. Floorshape stores every length in whole millimetres and adds a scale bar to PDF exports, so the plan stays measurable on any paper size. When importing an image of a plan, you set the scale once, either from printed dimensions or by clicking two points and typing the real distance between them.

Choosing a scale for your own plan

Pick the scale from the building size, the paper and the detail you need. A 12 × 10 m house at 1:100 is 120 × 100 mm on paper, which fits comfortably on A4 with room for dimension chains and a title block. At 1:50 the same house is 240 × 200 mm, which fills A4 landscape almost edge to edge, so A3 is the better choice.

For a listing or presentation, print size matters less than readability: make sure labels and dimensions are legible at the size people will actually view the plan.

When you receive a plan electronically, ask for the original PDF rather than an image; vector PDFs keep their dimensions exact at any zoom, and CAD programs can measure them directly. Screenshots and photos of plans lose that precision.

How it works

  1. Find the scale

    Look for a ratio, an imperial scale such as 1/4 in = 1 ft, or a scale bar.

  2. Check the paper size

    Confirm the plan is printed at the size it was drawn for, or use the scale bar instead.

  3. Measure on paper

    Measure the distance with a ruler in the drawing's unit.

  4. Multiply by the scale

    Multiply by the scale factor, for example 100 for 1:100 or 48 for 1/4 in = 1 ft.

Frequently asked questions

What does 1:100 scale mean on a floor plan?

At 1:100, one unit on the drawing equals 100 units in reality, so 1 cm on paper is 1 m in the building.

What scale are house floor plans usually drawn at?

Commonly 1:50 or 1:100 in metric countries and 1/4 inch = 1 foot (1:48) in the US.

Is 1/4 inch scale the same as 1:50?

No. 1/4 inch = 1 foot is a ratio of 1:48, close to but not the same as 1:50.

How do I find the scale of a plan without one?

Measure a dimension you know, such as a standard door width or a printed room size, and divide the real length by the measured length.

Sources

  1. Engineering ToolBox — Scaling blueprint drawings
  2. LibreCAD documentation — Common drawing scales
  3. U.S. Fire Administration — Engineer and architect scales
Early access · invites rolling out

Shape your next plan by asking.

Join early access. It's free while we build with our first users.

Invites go out in waves. Tell us who you are and we'll prioritise the workflows we can help with first.

Free during early access. No credit card.