Floor plan symbols and what they mean
Floor plans use a compact visual language so a whole home fits on one page. Most symbols are recognisable once you know what to look for, but they vary between countries, firms and software. This guide covers the common ones and the abbreviations you are likely to meet, and reminds you that the plan's own legend always wins.
Walls
Walls are drawn as two parallel lines with the space between them filled, hatched or left empty. Thick filled walls are typical of colored and listing plans. Hatching, a pattern of diagonal lines, is common on technical drawings and can indicate the wall's material. Thinner walls are usually interior partitions.
Openings in walls, such as an archway with no door, are shown as a simple gap, sometimes with a dashed line across it for a header or beam overhead.
Doors
A hinged door is a thin line for the door leaf, drawn at right angles to the wall, plus a quarter-circle arc showing its swing. The leaf sits on the hinge side; the arc ends where the door closes. A double door has two leaves and two arcs meeting in the middle.
Sliding doors are drawn as two parallel lines that overlap in the middle, and pocket doors as a leaf that disappears into the wall. Garage doors are often a dashed line across a wide opening.
Windows and glazing
Windows are shown as thin lines, usually two or three parallel lines, set within the thickness of the wall. In the US the most common form is two parallel lines interrupting the wall. Bay windows project outward from the wall line, and full-height glazing or glass doors are often drawn with the same thin lines running the full width of the opening. Colored plans sometimes tint the glass pale blue.
Stairs, fixtures and furniture
Stairs are a series of parallel lines, one per step, with an arrow labelled UP or DN from the current floor and a diagonal break line where the stair passes through the cut plane.
Kitchen symbols include the counter as a band along the wall, a sink as a rectangle with a small circle for the drain, and a hob as a square with four circles. Bathroom symbols include the toilet as an oval bowl in front of a rectangular cistern, the basin as an oval or rectangle, the bath as a long rounded rectangle and the shower as a square with a drain, sometimes with crossed lines.
Furniture symbols are simplified outlines seen from above: a bed with pillows, a sofa with cushions, a table with chairs. On colored plans they are drawn in color with soft shadows.
Dimensions, north arrows and abbreviations
Dimension lines have ticks or arrows at both ends and a number in the middle. A north arrow, often a simple arrow with an N, shows orientation. Section marks, circles with arrows, tell you where a cross-section drawing cuts through the building. Elevation marks work the same way and point to drawings of a wall seen straight on, which is where window heights and door sizes are shown.
- WC: water closet, a toilet room.
- W/D: washer and dryer; DW: dishwasher; REF or FR: refrigerator.
- CL or WIC: closet, walk-in closet.
- UP and DN: stair direction from this floor.
- Swedish plans: SOV (sovrum, bedroom), BAD (badrum, bathroom), KLK (klädkammare, walk-in closet).
Line types
Line weight and style carry meaning too. Thick solid lines are walls cut by the plan. Thinner solid lines are objects below the cut, such as counters, fixtures and furniture. Dashed lines usually show things above the cut, such as wall cabinets, beams and roof edges, or hidden elements. Long dash-dot lines are centerlines and grid lines.
Outdoor and site symbols
Plans that include the plot use a few more symbols. Trees are circles, often with a loose outline for the canopy. Paving is drawn as a grid or brick pattern, lawns as plain or lightly textured areas, and pools as a rectangle with an inner line for the edge. Boundaries are drawn as thick dashed or dash-dot lines, and steps as parallel lines with an arrow, like indoor stairs.
If you produce plans for others, add a short legend for any symbol or abbreviation that is not obvious, especially when the plan will be read in another country. A legend costs a few square centimetres of paper and saves a lot of questions.
Frequently asked questions
What does a door symbol look like on a floor plan?
A hinged door is drawn as a straight line for the door leaf plus a quarter-circle arc that shows the direction of its swing.
How is a sliding door shown on a floor plan?
A sliding door is drawn as two parallel lines that overlap in the middle of the opening, one for each panel.
What does WC mean on a floor plan?
WC stands for water closet and marks a room with a toilet, usually a small separate toilet room.
Are floor plan symbols the same everywhere?
No. Symbols and abbreviations vary by country, firm and software, so always check the legend on the plan you are reading.